Our worm gear reducers offer a choice of a good or hollow output shaft and feature an adjustable mounting placement. Both SW-1 and the SW-5, however, can withstand shock loading better than other decrease gearbox styles, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Acceleration Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s swiftness reducer products – has been serving industry reliably for over 40 years. Its verified modular design has set the sector standard for overall performance and is the most imitated item in the current worm gear speed reducer marketplace. But why accept a knock-off when you’re able to have the original – from EP Gear.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting flexibility allows for installation in virtually any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, along with greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high input speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales personnel for help determining which gearbox worm reduction gearbox remedy is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and invite for a corner switch with optional dual output. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest operation of our velocity reducers. These gearboxes are designed to handle varying loads with little backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size is also available with plastic-type gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest performance and best output torque of most our quickness reducers. These gearboxes are made to handle varying loads with little backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the best choice for constant duty applications. Their equipment cluster design provides a highly effective method for dissipating heat. Parallel shaft gearboxes possess the shortest amount of our inline equipment reducer options so they work very well in conditions with limited space. Our parallel shaft equipment reducers provide an affordable drop-in alternative solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, velocity reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a gear in the form of a screw, also known as a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other equipment reduction boxes. A primary benefit of worm equipment reducers is definitely that they produce an output that is 90° from the insight and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox provides right hand threads; to change the direction of the output, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio

Cast Iron Worm Equipment Reducers are available in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The units possess a one piece #Fc20 all cast iron housing, NEMA motor quill style input flanges or shaft inputs, come pre-stuffed with synthetic oil and have a 1 year warranty.

Features:
Tapered roller bearings on the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied outside and inside of the gearbox
Air dry special dark paint
Product Specifications

OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART NUMBER HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Right Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR A few minutes) 27
Result SHAFT THRUST LOAD (Pounds.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1

Ever-Power EP series triple-reduction worm gear quickness reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes on request). Result torque ranges from 33,000 in pounds. for the 7” CD EP-70 to 582,900 in lbs for the EP-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.

These reducers are perfect for water/waste-water apparatus drive applications such as for example thickeners and clarifiers, which require a vertical straight down shaft. Other obtainable configurations also make Ever-Power triple decrease reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or materials handling systems where large torques/sluggish speeds are needed.

These reducers are also available with a helical main reduction stage and are termed the HDVM series

Enclosed Gears / Gearboxes
Enclosed gears, also called gearboxes or swiftness reducers, are open gears within a housing. The casing supports bearings and shafts, keeps in lubricants, and protects the components from surrounding circumstances. Gearboxes can be found in a wide variety of load capacities and speed ratios.

The objective of a gearbox is to improve or reduce speed. Because of this, torque output would be the inverse of the function. If the enclosed drive is definitely a swiftness reducer, the torque output will increase; if the drive improves speed, the torque result will decrease. Gear drive selection elements include: shaft orientation, speed ratio, design type, character of load, gear rating, environment, mounting position, working temperature range, and lubrication.

Basic Types of Gearboxes

Worm Gear Speed Reducers
A single reduction speed reducer can achieve up to 100:1 decrease ratio in a little package. Referred to as right position drives, these consist of a cylindrical worm with screw threads and a worm. With an individual begin worm, the worm gear advances only one tooth for every 360-degree switch of the worm. So, whatever the worm’s size, the gear ratio is the ‘size of the worm gear to 1′. Higher decrease ratios could be created by using double and triple reduction ratios.

Helical Gear Speed Reducers
Provide high-efficiency speed decrease through 1, 2, 3, or 4 pieces of gears. Power is usually transmitted from a high-rate pinion to a slower-speed gear. Helical gears generally operate with their shafts parallel to one another. Both most common types will be the concentric (insight and result shafts are in range) and parallel shaft (insight and output shafts are offset). Single-stage helical equipment reducers are usually used for equipment ratios up to about 8:1. Where decrease speeds and higher ratios are necessary, dual, triple, and quadruple gear reduction stages may be used.

Cycloidal Disc Speed Reducers
Different from conventional gearing because they operate without a high quickness pinion or equipment teeth, and the components operate in compression instead of shear. This is because of the style of the cycloidal discs that roll within a ring gear housing, comparable to a planetary style. The primary components will be the eccentric cam, the internally flanged output shaft, the discs, and the ring gear housing.

Three Mounting Options
(L-R) Foundation Mounted, Shaft-Mounted, Gearmotor
(L-R) Base-Mounted, Shaft-Mounted, Gearmotor

Base-mounted reducers, which have feet for bolting, are the most common.

Shaft-mounted reducers have a hollow output shaft that slips over the driven shaft.

A gearmotor combines a specific gearset with a motor. A motorized reducer resembles a gearmotor except that it’s driven by another NEMA C-face motor.

Seals and Breathers
Seals are used between your gear housing and input and result shafts to retain oil and block dirt. The most commonly used type, the radial lip seal, includes a metallic casing that fits in to the casing bore and an elastomeric sealing lip that presses on the shaft. Labyrinth seals are use for high-rate applications, and contain a housing with some bands that limit leakage. A breather is a plug with a hole that is mounted in the gear housing allowing airflow and relieve inner pressure.

Lubrication
Enclosed gears are usually lubricated with oil. The most common types of oil are rust and oxidation inhibiting, extreme pressure, compounded, and synthetic. Other types include grease and solid film. Grease can be utilized for worm, planetary, cycloidal, and hypoidal reducers. Common distribution strategies are a splash program and a circulating system
Worm Reduction Gearbox Software:

Worm drives certainly are a compact method of substantially decreasing quickness and increasing torque. Small electric motors are generally high-speed and low-torque; the addition of a worm drive escalates the range of applications that it could be suitable for, particularly when the worm drive’s compactness is considered.

Worm drives are used in presses, in rolling mills, in conveying engineering, in mining sector machines, and on rudders. In addition, milling heads and rotary tables are positioned using high-precision duplex worm drives with adjustable backlash.