Product features of drum gear coupling:
1.High Transmission Efficiency Can Reach 99.7%
2.High Loading Capacity: With the same external dimension, the loading capacity is 15%~20% averagely higher than that of straight-tooth coupling
3. Large Angular Compensation: The maximum allowable angular misalignment is 1.5°, 50% higher than that of straight-tooth coupling
4.More Scientific Gear Tooth Design: It avoids local stress concentration caused by straight tooth edge extrusion, and tooth surface friction is eased at the same time.
5. Gear tooth of external gear sleeve is horn-shaped, which makes it easy to install and dismantle.
6. Long Service Life: The internal and external gear teeth are made of high strength alloy steel. After quenched-tempered heat treatment, gear teeth rigidity and wear resistance are improved.
Product models of drum gear coupling:
GIICL1——GIICL13 GIICL14——GIICL20
Customize Your Product
1. Application to: e.g. conveyor, crusher, compressor, etc.
2. Driving end related parameters:
Motor power(KW):
Motor rotation speed(rpm):
Reducer speed ratio:
For cylindrical shaft, please provide:
Shaft end gap length B(mm):
Center height H(mm):
High speed shaft:
Driving end: shaft diameter d1(mm), shaft length L1(mm),
key groove width b(mm), key groove depth t(mm);
Driven end: shaft diameter d2(mm), shaft length L2(mm),
key groove width b(mm), key groove depth t(mm);
Low speed shaft:
Driving end: shaft diameter d1(mm), shaft length L1(mm),
key groove width b(mm), key groove depth t(mm);
Driven end: shaft diameter d2(mm), shaft length L2(mm),
key groove width b(mm), key groove depth t(mm);
Notice:
1. If you do not provide B or H, it is defaulted to enough space for installation based on parameters in catalog.
2. If your requirement is different from this drawing, please provide your technical drawing.