Cycloidal pinwheel reducer can be a up-dated of innovative type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin steering wheel clenching device, which are widely used in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical Industry, cranes, conveyors and job machinery etc. various fields.
Features:

1. Equipment is constructed of high power low carbon alloy metal by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is used for all gears, good get in touch with performance and with large precision
2. high transmission efficiency: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service life and high bearing ability;
5. convenient to check, disassemble and assemble.

Operation specifications and precautions
1.High modularization design: many equip with various motor or other power input conveniently.Same machine type may equip with many power motor. It is easy to know the combination and
junction between every equipment type.
2.Transmission ratio: okay division, wide scope. The combined machine type may form large transmitting ratio, i.e. productivity suprisingly low rotary speed.
3.Form of installation: the positioning to be installed is not limited.
4.High strength, small: the box body is constructed of large strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and excellent grinding process, therefore the bearing capacity of unitvolume is huge.
5.Long life: Under the condition of right type chosen (including choosing suitable operation parameters)normal operation and maintenance, the life span of main elements of speed reducer (except wearing parts) shouldn’t be significantly less than 20000 hours. The wearing parts include lubricating oil seal, oil and bearing.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is certainly low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High acceleration ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-downwards ratio and the efficiency is a lot more than 90%. If employ multi-speed get the speed-down ratio is normally bigger.
2. Compact
Being adapted epicyclic transmitting theory, the input and outcome shaft are at same axis middle, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound at the minimum content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can understand high reduction ratio device.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved as well, and there are several gears engaged with 180 degree symmetry. Consequently, the impact of tooth pitch error and cumulative tooth pitch error on the rotation accuracy is relatively average, making the positioning precision and rotation accuracy reach a very high level.
4. Less parts, easy installation
The three basic elements achieve a high deceleration ratio, and they are all on a single axis, therefore the kit is easy to install and simple to shape.
5. Small in size and light in weight
Compared with the prior gear device, the volume is 1/3, the fat is 1/2, but can buy the same torque capability and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel material USES special steel with high fatigue strength.Not the same as ordinary transmission device, the amount of teeth meshing accounts for close to 30% of the full total amount of teeth. Furthermore, it is in call with the surface, in order that the pressure borne by each equipment is reduced and huge torque capacity can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss due to friction. Therefore, high lowering ratio can be achieved while maintaining high efficiency, and miniaturization of generating motor could be realized.
8. Low noise
The gear meshing cycle swiftness is low, the transmission activity force balance, therefore the procedure is quiet, and the vibration is very small.
◆Excessive speed ratio and excessive efficiency single-stage transmission can perform a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will end up being larger.
◆Because planetary transmission principle is adopted, the insight shaft and result shaft are on a single axis line, to ensure that the machine style can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts creates the vibration and voice limited to a minimum.
◆Reliable use and prolonged service life since the primary parts are constructed of substantial carbon chromium steel, excessive strength is going to be obtained by quenching (HRC58-62), and rolling friction is employed in some transmission contacts, therefore the service life is long.
Cycloid reducer is usually a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has various advantages, versatile, and can be both negative and positive operation.

•Big ratio, and high efficiency Smooth operation,

• low noise The usage of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically zero wear, durable.

• Compact structure,

• tiny size Because the use of a planetary transmitting, the suggestions shaft and the output shaft on a single axis, making the model to obtain the smallest possible size.

• Reasonable design, easy protection, and break down easily install,

• minimal number of parts and straightforward lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall world pinion improve the output strength, carrier and precision.

(2).Hoop clamp coupling have five connection methods suitable for different application environments.

(3).Size in this article PL/PF120(incorporating)precision and high durability integral inner gear casing, processed in a single station,which get rid of the cumulative mistake and assembling mistake of split type.Get rid of casting process;adopt popular of forging process, that may decrease the blank material defects.

(4).The meshing equipment adopt shaving method after carburizing and quenching,which much easier to make gear surface smooth and high accuracy,reduce the temperature rising caused by gear area gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its functionality and mounting dime nsions conform the same varieties of foreign.
The combination of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square beautiful shape, shape, compact structure, radiate heat efficiently and low noise.
Very good sealing and adaptability.Its blend with T equipment reducer and MB/MBN variator may meet all types of speed requirement.